Graphic equalizer display flashes LED sign to the beat

May 14, 2012 By Leave a Comment

Careful planning and a steady hand let [Leo Rampen] fit everything he needed to build a graphic equalizer display on his LED wall sign. There’s a lot of components that needed to fit on this board, and he decided not use to an etched board for the build.

The idea for the project started off as just an LED sign. After spelling out “Sweat Box” using LED rope lights, he needed a way to switch them on and off. But why stop there? He also decided to use an MSGEQ7 chip in the build since the sign adorns their party-room and adding music-based flashing lights seemed like a good idea.

He laid out the equalizer chip, ATmega328 (running the Arduino bootloader) and a series of N-channel MOSFETS for switching the LEDS out in Eagle. With design in hand he grabbed a medium-sized piece of strip board and used a drill to cut the traces where necessary. In the end he has a very flashy sign as shown in the clip after the break.

[Read more…]

Filed Under: news Tagged With: ,

Hackaday around the web and into the future

May 14, 2012 By Leave a Comment

Like everyone else, we’re scattered all over the web. We would be silly not to be getting our information out there in as many ways as we can manage. We promise that the site always comes first, but you can also find us on Facebook, G+ (yes, we’re approved this time), twitter, and we even have a flickr group where people post pictures of their projects!

We’ve got some stuff planned for the near future that we’re excited about too.

1.We’re working behind the scenes to bring out a new template for the site. This will allow us to clean things up a bit and hopefully make browsing a little easier (searching too!). Don’t worry, we’re not changing the logo.

2.We are also planning on starting some “show and tell” sessions on G+. We love what Adafruit has been doing with theirs, and we’re hoping to join in on the fun. We realize some of you are opposed to g+, so feel free to offer other solutions to do the show and tell, we would be happy to hear them. They will be recorded and linked on the site here, so you can follow along even if you can’t join.

3.We’re bringing back the store! This time, however, we’ll have a full spread of stuff. We’re not making it in our garages anymore. For now, it will be clothing and accessories, but we’re considering doing some electronics and tools in the near future as well.

The writers are also very busy with things on the web. We’re not always locked to our keyboards slaving away. If you want to be able to follow along with us, you can find our information after the break.

[Read more…]

Filed Under: news Tagged With: , , , ,

The making of a Vacuum Tube

May 14, 2012 By Leave a Comment

With the death of Heathkit looming  in our minds it’s high time for a a heartwarming story. [Ronald Dekker] has done a wonderful job documenting the history of the E1T beam counting tube, detailing everything from the work led up to the invention of the tube to the lives of the inventors themselves.

For those who are unaware, the E1T is a rather strange vacuum tube capable counting from 0 to 9. While that’s nothing too special in itself, the tube also displays the numbers on a phosphor screen, much like a miniature cathode ray tube. In fact, this phosphor screen and the secondary emission caused by it is critical to the tubes operation. To put it bluntly, it’s a dekatron and a magic eye tube smashed together with the kind of love only a group of physicists could provide.

Now, who wants to have the honor of transposing Ronald’s story into a wikipedia article?

Filed Under: news Tagged With: ,

Amphi-Cycle lets you ride the trails, the waves, and back again

May 14, 2012 By Leave a Comment

amphi-cycle

Hackaday regular [Berto] is always looking for new ways to get around, and wrote in to share his most recent creation, an amphibious bicycle.

He bought an off-the-shelf inflatable boat and constructed a rig that allows him to stably mount the bike on it. Once [Berto] comes across a body of water he wants to cross, all he requires is about 7 minutes time to inflate the boat and attach his bike. Using a modified version of his electric drill-based trolling motor we saw last year, the Amphi-cycle glides across the water effortlessly as demonstrated by his assistant in the video below.

Right now the boat is propelled solely by the trolling motor and a large lead-acid battery. We would love to see the amphi-cycle powered by its rider, though we don’t know how that would affect the “one boat fits all” design [Berto] is aiming for.

[Read more…]

Filed Under: news, transportation hacks Tagged With: , , ,

Heathkit closes down, again.

May 12, 2012 By Leave a Comment

With this rather large flip flop, Heathkit has closed its doors… again. The company that so many of us remember fondly from their myriad of electronics kits originally closed its doors in 1992. Last year, there was an announcement of a revival and a call for kit submissions. Unfortunately, it looks like that just didn’t work out. While this isn’t an official announcement, the facts appear to line up to Heathkit closing their doors.

If you’d like to re-live a few fond memories, here’s a Heathkit unboxing at EMSL.

Filed Under: news Tagged With: ,

Destroying stuff for the good of all mankind

May 12, 2012 By Leave a Comment

NC state’s constructed facilities laboratory is a place where things get broken for science. We’ve shared several videos lately of things being sliced, diced, sheared, exploded, and smashed, purely for the fun of it, and now we feel like we should compensate a little bit. No, we’re not going to undergo physical punishment, instead, we’ll share some educational destruction.

In the video after the break, you can see a few things pushed to their absolute limits, then a bit further. The Constructed Facilities Laboratory is a research lab that tests the limits of some of the infrastructure that we rely on daily. Bridges, roads, walls, support beams. Someone needs to figure out what they can really handle. Even more interesting than the short video below, are all the different videos in the tour that explain how the facility is constructed an how they operate. Take a few minutes and enjoy the tour.

[Read more…]

Filed Under: news Tagged With: ,
« Older Posts