Controlling Raspberry Pi expansion pins with a web interface

May 5, 2012 By Leave a Comment

For the lucky few who have a Raspberry Pi board in their hands, you can now use the GPIO pins as a web interface (German, google translation). [Chris] is turning this magical board is turning a small device that can play 1080p video into something that can blink LEDs via the web.

The build started with an example of driving GPIO pins under Linux. [Chris] cobbled together a bit of PHP and Javascript on the Raspberry pi. Whenever he goes to the website hosted on the Pi, he’s greeted with the status and direction of a couple of expansion IO pins.

On a semi-related note, [Tony] is building a GPIO MIDI interface for his Pi. Yes, he could just get a USB to MIDI adapter and call it a day, but this is a far more professional looking solution to all the MIDI goodness the RasPi will deliver. If you’ve got any info on other RasPi breakout boards you’ve seen, send them in on the tip line.

Filed Under: Rasberry pi Tagged With: , , ,

Vintage VT100 terminal computing…with a Beaglebone

March 7, 2012 By Leave a Comment

decbox

A cool little project came our way, which we thought might be of interest to some of you vintage computer buffs. [Joerg Hoppe] wrote in to share a DEC VT100 terminal he resurrected in a novel fashion.

His “DECBox” system was created with a Beaglebone, which he uses to run a wide array of PDP11/VAX terminal emulators, thanks to the SIMH project. [Joerg] constructed an expansion shield for the Beaglebone that provides several UART connections, enabling him to connect it to his DEC terminal over a serial interface. Since he added several serial plugs to the Beaglebone, he can even run multiple emulator installations in parallel on different terminals without too much trouble.

[Joerg’s] efforts are mainly for a vintage computer display he is constructing, but setting up such a system of your own should be no problem. If you happen to have one (or more) of these boxes sitting around collecting dust, this would be an easy way to get them all up and running without bulky external hardware, since the Beaglebone tucks nicely into the rear expansion slot on a VT100.

Be sure to check out his site for more details on how his DECBox software package works as well as for more pictures of vintage terminal goodness.

Filed Under: classic hacks Tagged With: , , , , , , ,

AltSoftSerial looks to speed up Arduino software UART

February 13, 2012 By Leave a Comment

So let’s say your using an Arduino in your project. You already have the hardware-based serial interface working with one portion of the project and need a second serial port for unrelated hardware. The obvious solution is to write one in software. But this is a place where working in the Arduino environment gets really hairy. Since there’s a layer of abstraction between the code and the hardware interrupts, it can be difficult to know if you are going to have timing problems. But there’s a new library available which seeks to reduce the latency of software-based serial communications so that you don’t have to worry about it.

It’s named AltSoftSerial because it is a software-based serial library that is an alternative to the NewSoftSerial package. The former can function with just  2-3 microseconds of latency, while the latter has as much as a 174 microsecond hit. If it functions as advertised that’s quite an improvement. It’s not hard to put together a hardware test platform, and the example program is only about a dozen lines of code (which is the beauty of working in this environment) so give it a try if you have a free hour here or there.

Filed Under: arduino hacks Tagged With: , ,