Beautiful wooden case for a portable NES

After building a few portable gaming systems, [Parker] wanted to try something a little different than the usual sleek plastic builds. He decided to go with a nice wooden classic NES. He started by gutting a NOAC or Nintendo On A Chip. The NOAC has already done most of the miniaturization for him, so he was mainly focusing on the portability. While this wasn’t the most extreme mod, it wasn’t just a case swap either. He took great pictures of the process of modifying the screen to work and putting everything together. The final product is fantastic looking.

The first comment we thought was, why is the game facing backward? Due to the shape of the NOAC board, he would have had to either add more depth to the case, or extended and flipped the actual cartridge plug to make the game face forward, so we can understand why he left it alone.

Building giant temperature displays from Gottlieb display wheels

On Saturday, we found a cool article where pinball machine display wheels were being used as a display. In that article, one of the listed inspirations was this giant Gottlieb wheel being used to display the water temperature of a pool.  Before we go further, we’d like to mention that this project is hosted on a magazine’s website that requires you to register to get 1 free download. We did, and no financial information was required.

[Ludovic], they author of the project, was looking for an efficient and highly visible way to display the temperature in his pool. He wanted something he could see from 30 yards away, that had minimal power usage. These pinball reels were perfect, being easy to read and having virtually zero power draw when not updating.

Keep reading for a video and some more information.

[Read more…]

Simple mod to keep your downstairs neighbors from hearing you pound the keys

[Mesoiam] managed to pick up a Viscount hammer weighted keyboard for pretty cheap. For those who are unfamiliar, Viscount makes keyboards that feel like you’re playing a piano, hammers and all. The only problem with this, as [Mesoiam] discovered, is that even when he’s jamming with headphones in, his friends down stairs can still hear the keyboard banging due to the vibration going through the stand to the floor. His resolution to this problem was to build some custom dampers to reduce the vibration. He built two brackets that fit over the stand and suspend the keyboard on two strips of flexible rubber. Quite a simple solution to a possibly annoying problem.

Using pinball score reels as wireless displays

[Scott] put together a system where he can use pinball score reels as a wireless display. As you can see in the video below, the result is really neat. The sound alone makes this shoot pretty high on our “things that are cool” radar. The display required 24V AC to operate the solenoids that actually let the display rotate, but he found that an 18V DC supply would allow him to fire a single solenoid. No problem, he just staggered their operation. This is barely perceptible due to how long it takes for the mechanical part of the spinning to occur.

You can download his Arduino sketch and see more on his site. He has big plans too, he just got 4 more of these to add once they are cleaned up.

[via Adafruit]

[Read more…]

Playing the song "Still Alive" on hacked exercise equipment

Back in 2009, [Evi1wombat] pulled of this interesting hack, and it has slowly made its way through the internet to find us today. He obtained the computer from a recently deceased treadmill and decided to hack into it. Finding himself unable to flash the existing chip, he yanked it out and replaced it with something he was more familiar with, a dsPIC30F4011. Unfortunately we don’t have any pics of the inside, but he says that he had some fun with wire because the pin mapping wasn’t exactly the same. [Evi1wombat] also gained some respect for the original designer judging by  this quote from the source code:

* Damn, the dude who designed that board pulled
* some pretty nifty tricks… took a while to
* get all the drivers working.

Of course, once you have control over some nifty new hardware, the first logical thing to do on it is play “Still Alive” from the game Portal.

Enjoy the video after the break.
[Read more…]

[Jaimie's] Giant Hexapod project

Warning, this may be a duplicate post. We all agree we’ve seen this before, but can’t find it in our archive. If it is, sorry. If it isn’t enjoy one of the most awesome projects we’ve seen in a long time.

Meet [Jaimie Mantzel] an eccentric, and very hyper, individual. He’s done many projects, but this one in particular stands out as being quite ambitious. [Jaimie] is building a giant hexapodal walker that he can ride in. Dubbed simply “Giant Robot”, the 12 foot tall and 18 foot wide robot began construction in 2007. This individual is so full of energy, you’ll get tired just watching his videos. We’ve included, below, his introduction video as well as the video where his giant robot takes its first steps. Note that there are 67 videos of the build process. Unfortunately, as of the last video in January 2011, the robot is unfinished.

Don’t worry though, we know [Jaimie] is still alive. We saw him recently coming up with cool toy ideas.

If this has left you with an insatiable craving for a video of a fully functional giant walking hexapod octopod, don’t forget about mondo spider.

[Thanks Kamil]

[Read more…]